If You Cannot Make Copies As You Want; General - Lanier Copier System Edition Operating Instructions Manual

If You Cannot Make Copies As You Want

General

Problem
Copies are not stapled.
Staples are wrongly positioned.
Misfeeds occur frequently.
You cannot combine several func-
tions.
When sorting, the pages are divided
into two blocks.
Operating Instructions
Cause
There are jammed staples in the sta-
pler.
The number of copies exceeds the ca-
pacity of the stapler.
Copy paper is curled.
Originals are not placed correctly.
Copy paper size setting is not correct. Set the proper paper size.
Selected functions cannot be used to-
gether.
The memory became full in the mid-
dle of sorting and the pages were de-
livered in two blocks.
Copy Reference <Advanced Features>
Solution & Reference
Remove jammed staples.
moving Jammed Staples", Mainte-
nance Guide 2 Copier System Edition
Note
After removing jammed sta-
ples, staples might not be
ejected the first few times
you try to use the stapler.
Check the stapler capacity.
ple", Basic Features manual
Turn the copy paper over in the tray.
Place the original on the upper left
corner of the exposure glass.
ple", Basic Features manual
Tray (Tray 1 - 4)", Administrator
Reference 2 Copier System Edition
Check the combination of functions
and correct the settings.
You can interrupt the copying when
the memory becomes full.
ple", Basic Features manual
79
"Re-
"Sta-
"Sta-
"Paper
"Sta-