Lanier Copier System Edition Operating Instructions Manual page 352

Key Operator Code
Important
The administrator must properly manage the key operator codes set for the machine.
This specifies whether or not to use passwords (max. 8 digits) to control use of the "Timer Setting"
or "Key Operator Tools" settings for the access codes.
Note
Default: OFF
If you select "ON", enter the access code (max. 8 digits) with the number keys, and then select
"Partial" or "All Initial Settings" to set the access limit.
• If you selected "Partial"
A key operator code is only required for the "Timer Setting" and "Key Operator Tools" for
initial settings. "Menu Protect" will be set for "Maintenance" in the Printer Features.
• If you selected "All Initial Settings"
A key operator code will be required to access all the items in the System Settings, Mainte-
nance, Copier/Document Server Features, Facsimile Features, Printer Features, and Scanner
Features.
If you select "All Initial Settings", you will need to enter the key operator code to access the Key
Operator Code screen.
AOF (Always ON)
Activate the Auto Off Timer settings. Normally, you need not change this setting.
Note
Default: ON
Operating Instructions Administrator Reference 2
123