Lanier Copier System Edition Operating Instructions Manual page 349

Fax RX File Transmission
• Setting per Line
Specifies whether or not received fax documents should be sent to ScanRouter V2 Professional
for each of the fax lines.
Note
Default: G3 Port 1/Do not Deliver, G3 Port 2/Do not Deliver, G3 Port 3/Do not Deliver
• Print at Delivery
Specifies whether or not received fax documents that are sent to ScanRouter V2 Professional
should also be printed by the machine at the same time.
Note
Default: No
• File to Deliver
Specifies whether all received fax documents or only received fax documents that include deliv-
ery codes (documents with an ID and F code) should be sent to ScanRouter V2 Professional.
Note
Default: File with Dlvry Code
• Delivery Failure File (Dlvry Failure File)
If a received fax document cannot be sent to ScanRouter V2 Professional, the document is stored
in the machine's memory. To print this stored data, select "Print File"; to delete the data, select
"Delete File".
Note
If the machine can send data to ScanRouter V2 Professional, data is sent automatically.
If you delete the data, you will not be able to distribute or print the data.
Operating Instructions Administrator Reference 2
120