If The Machine Cannot Detect The Size Of Your Original - Lanier Copier System Edition Operating Instructions Manual

B B B B Press [OK].
Note
❒ To cancel the mixed original
size, press [Cancel]. The
menu returns to that of step
B
.
D D D D
Specify the receiver and press the
{ { { { Start} } } } key.
If the Machine Cannot Detect the Size of
Your Original
If the machine cannot detect the orig-
inal size, the following display is
shown:
If this happens, carry out the follow-
ing steps.
A A A A
Press [Exit].
B B B B
Remove the original, and then re-
place it on the exposure glass.
C C C C
Press the { { { { Start} } } } key to scan the
original again.
If the above display appears again,
A
repeat steps to
Note
❒ If the machine still cannot detect
the original size, the following
display is shown:
❒ If this happens, carry out the
following steps.
• Press the key to switch the
Scan Size.
• Press the { { { { Start} } } } key again.
Placing Originals
C
.
2
21