Lanier Copier System Edition Operating Instructions Manual page 825

Message
[Error has occurred in the scanner.]
[Error has occurred in the scanner driver.]
[Insufficient memory. Close all applications, then restart
scanning.]
[Insufficient memory. Reduce the scanning area.]
Operating Instructions
Causes and Solutions
Check whether the scanning settings specified by appli-
cation exceed the setting range of the machine.
• Check whether a network cable is connected correct-
ly to the computer.
• Check whether the Ethernet board of the computer is
recognized correctly by Windows.
• Check whether your computer can use TCP/IP proto-
col.
Terminate the unnecessary application started by the
computer.
• Reset the scan size.
• Lower the resolution.
• Set with no compression.
Settings"
Note
The chart "The Relationship between the Res-
olution and the Scanning Area" in Help for
halftone scanning might not always apply.
Scanning cannot be performed if large values
are set for brightness when using halftone or
high resolution.
When paper misfeed occurs in the machine
during printing, scanning cannot be per-
formed. In this case, after the misfed paper
has been removed, proceed with scanning.
Scanner Reference
p.35 "Making Scanner
109