Printer Does Not Print - Lanier Copier System Edition Operating Instructions Manual

Printer Does Not Print

Possible Cause
Is the power on?
Does the Online indicator stay
on?
Does the Error indicator stay
red?
Is paper loaded?
Can you print a configuration
page?
Is the interface cable connecting
the printer to the computer con-
nected securely?
Are you using the correct inter-
face cable?
Operating Instructions
Confirm that the cable is securely plugged into the power outlet and the printer.
Turn on the power switch.
Press [On Line] so the indicator lights.
Check the error message on the panel display and take the required action.
Load paper into the paper tray or on the Bypass Tray.
See p.12 "Paper and Other Media Supported by This
If you cannot print a configuration page, it probably indicates a printer malfunc-
tion. You should contact your sales or service representative.
See "Printing a Configuration Page" in Administrator Reference 2.
Connect the interface cable properly. If there are any connectors or screws, con-
firm that they are fastened securely.
The type of interface cable you should use depends on the computer. Be sure to
use the correct one.
If the cable is damaged or worn, replace it with a new one.
See "Appendix" in Administrator Reference 2.
Maintenance Guide 2 Copier System Edition
Solutions
Machine".
59