Automatic Redial; Batch Transmission; Ecm (Error Correction Mode) - Lanier Copier System Edition Operating Instructions Manual

Automatic Redial

If a fax message could not be transmitted because
the line was busy or an error occurred during
transmission, redialing is done 5 times in 5 min-
utes intervals (these figures vary according to
which country you are in).
If redialing fails after four redials, the machine
cancels the transmission and prints a Transmis-
sion Result Report or Communication Failure
Report.

Batch Transmission

If you send a fax message by Memory Transmis-
sion and there is another fax message waiting in
memory to be sent to the same destination, that
message is sent along with your original. Several
fax messages can be sent with a single call, thus
eliminating the need for several separate calls.
This helps save communication costs and reduce
transmission time.
Fax messages for which the transmission time
has been set in advance are sent by batch trans-
mission when that time is reached.
Operating InstructionsFacsimile Reference (option) <Advanced Features>
Note
You can turn this function on or off with the
User Parameters.
User Parameters" (Switch14, Bit2)

ECM (Error Correction Mode)

This feature automatically sends data that was
not transmitted successfully using a system that
complies with international standards.
ECM requires that the destination machine has
the same feature.
Note
You can turn this function on or off with the
Key Operator Settings.
p.216 "Changing the
p.214 "ECM"
124