Checking Destinations - Lanier Copier System Edition Operating Instructions Manual

2. Checking and Canceling Transmission Files
After you have pressed the { { { { Start} } } } key (after scanning originals), you can check and edit the destination
or settings of Memory Transmission. You can also cancel a transmission, change the settings of a trans-
mission, print a stored file, print a list of stored files and resend a file which failed to transmit.
This feature is available for Memory Transmission, Confidential Transmission, Transfer Request, Poll-
ing Reception and Polling Transmission.
Limitation
You cannot check or edit a file being sent or received. Also a Confidential Transmission file or stored
file to be printed as a report cannot be checked or edited.
Note
There is no file being sent, received or stored by Memory Transmission, if [Change/Stop TX File] does
not appear on the display.

Checking Destinations

A A A A
Press [Change/Stop TX File].
Operating InstructionsFacsimile Reference (option) <Advanced Features>
Chapter 2, "Memory Transmission" in the Basic Features manual
B B B B
Select [Check/Change Settings].
Scanning date/time, transmission mode, destina-
tion, total number of destinations, total number of
originals, file number and Status are displayed.
30