Lanier Copier System Edition Operating Instructions Manual page 466

Message
npriter start. (NetWare)
nwstart start. (NetWare)
Open log file "file name"
papd start.
phy release file open failed.
Print queue "print queue name" cannot be serviced by
printer 0, "print server name"
Print server <print server name> has no printer.
Print session full
Printer "printer name" has no queue
pserver start. (NetWare)
Operating Instructions
Description and Solutions
(In remote printer mode) NetWare service has started in
remote printer mode.
The service for NetWare protocol stack setting has start-
ed.
(In print server mode) The specified log file has been
opened.
AppleTalk print service has started.
Replacing the Network Interface Board is required. Con-
tact your sales or service representatives.
(In print server mode) The print queue name cannot be
serviced. Make sure that print queue volume exists on the
specified file server.
(In print server mode) The printer object is not assigned
to the print server <print server name>. Using NWAd-
min, assign the printer object, and then restart the printer
device.
Cannot accept the print session.
(In print server mode) The print queue is not assigned to
the printer. Using NWAdmin, assign the print queue to
the printer, and then restart it.
(In print server mode) NetWare service has started.
Administrator Reference 2
237