Lanier Copier System Edition Operating Instructions Manual page 307

If you cannot find the desired document
using the names, you can print the first
page of a document to check its contents.
Press the line for the desired document,
and press [Print 1st Page] followed by the
{ { { { Start} } } } key.
Press the selected line again to cancel the
print job.
C C C C
To print more than one document, repeat
B
step to select the desired documents in
the order you want to print them out.
The selected order is shown in the priority
column next to the selected document(s).
Note
Up to 30 documents can be selected for
printing.
If several files have been selected, you
may not be able to print if the size or the
resolution of each file is different.
To change the print order, press the high-
lighted lines to cancel their selection, and
then select them again in the order you
want to print.
Press the { { { { Clear Modes} } } } key to cancel all
the settings.
If you press [Printg Odr], the selected doc-
uments are displayed in printing order.
Operating Instructions
D D D D
Administrator Reference 2
If you need to change any of the print set-
tings, press [Print Settings].
The "Print Settings" display appears.
Note
The print settings are stored in the ma-
chine after printing and applied to the next
printing.
If several files have been selected, the
print settings of the first file are stored in
memory but those of the other files are not.
The print setting items are listed below.
For more information about the print re-
sults according to each setting, see the
Copy Reference <Basic Features>.
78