Lanier Copier System Edition Operating Instructions Manual page 692

Erase Border Width
The default setting of the width of the erased margins in Erase Border mode can be changed as fol-
lows:
• Metric version: 2 – 99mm in 1mm steps
• Inch version: 0.1" – 3.9" in 0.1" steps
Note
Default:
• Metric version: 10mm
• Inch version: 0.4"
Erase Original Shadow in Combine
In Combine Copy mode, you can specify whether to erase a 3mm, 0.1" bounding margin around all
four edges of each original.
Note
Default: Yes
Erase Center Width
The default setting of the width of the erased margins in Erase Center mode can be changed as fol-
lows:
• Metric version: 2 – 99mm in 1mm steps
• Inch version: 0.1" – 3.9" in 0.1" steps
Note
Default:
• Metric version: 10mm
• Inch version: 0.4"
Operating Instructions Copy Reference <Advanced Features>
117