User Tools (System Settings); Accessing The User Tools (System Settings); Changing The Settings - Lanier Copier System Edition Operating Instructions Manual

5. User Tools (System Settings)

Accessing the User Tools (System Settings)

This section is for the key operators in charge of
this machine. You can change or set the ma-
chine's default settings.
Preparation
After using the User Tools, be sure to exit
from the User Tools.
The selected key is highlighted.
Any changes you make with the User Tools
remain in effect even if the main power switch
or operation switch is turned off, or the { { { { Ener-
gy Saver} } } } key is pressed.
Depending on whether options are installed or
not, the illustrations may differ.

Changing the Settings

A A A A
Press the { { { { User Tools/Counter} } } } key.
The User Tools Main Menu appears.
Operating Instructions
B B B B
C C C C
D D D D
Administrator Reference 2
Press [System Settings].
Select the desired menu and press the de-
sired key.
Change the settings by following the instruc-
tions on the display panel. Then press [OK].
Note
[OK]: Press to set the new settings and re-
turn to the previous menu.
[Cancel]: Press to return to the previous
menu without changing any data.
To cancel the changes made to settings
and return to normal the function display,
press the { { { { User Tools/Counter} } } } key.
92