Lanier Copier System Edition Operating Instructions Manual page 334

Note
The output trays set on the printer driver have priority over the output tray specified above.
For details about output trays, refer to the illustration in
If 2 Tray Finisher is installed and the Staple function is selected, the machine outputs the paper
from Finisher Tray 2 regardless of the output setting.
Tray Paper Settings
Paper Tray Priority: Copier (for Copy/Document Server function only)
You can specify the output tray for delivery.
• Tray 1
• Tray 2
• Tray 3
• Tray 4
Note
Default: Tray 1
When optional paper feed units are installed, Tray 3 and Tray 4 are displayed.
When the optional 2000-sheet Large Capacity Tray is installed, Tray 3 is displayed.
Paper Tray Priority: Printer (for printer function only)
You can specify the output tray for delivery.
• Tray 1
• Tray 2
• Tray 3
• Tray 4
Operating Instructions
1
/
3
Administrator Reference 2
p.103 "Output: Copier".
105