Slip Sheets - Lanier Copier System Edition Operating Instructions Manual

Slip Sheets

Every time the originals' page changes, a slip
sheet is inserted. This function can be used to in-
sert a slip sheet automatically between each OHP
transparency copied or used as a Stack function.
You can also copy onto the inserted slip sheets.
Limitation
• You cannot specify the Bypass Tray as the
paper tray for the slip sheets.
Preparation
Before selecting this function, specify the pa-
per tray for slip sheets.
Copy/Document Server function only)", Admin-
istrator Reference 2 Copier System Edition
The default setting of inch version is "1 Sided
2 Sided". When copying with the Slip
Sheets function, set "1 Sided
"Dup./Combine/Series".
Operating Instructions
"Slip Sheet Tray (for
1 Sided" in
Copy Reference <Advanced Features>
Note
The paper tray specified for "Slip Sheet" is
used in this function.
Set the slip sheets in the same orientation as
originals.
You can specify whether to copy onto the in-
serted slip sheets or not.
If you do not copy onto slip sheets, they are
excluded from the number of copies counted.
When inserting slip sheets between OHP
transparencies
• Copy
49