Interface Settings/Parallel Interface - Lanier Copier System Edition Operating Instructions Manual

Ethernet Speed
Set the access speed for networks.
Select a speed that matches your network environment. "Auto Select" should usually be specified.
Note
Default: Auto select

Interface Settings/Parallel Interface

Parallel Timing
Specifies the timing setting for the parallel interface. Under normal circumstances, you will not need
to change this setting.
Note
Default: ACK outside
Parallel Communication Speed
Specifies the communication speed for the parallel interface. If the communication speed is set too
fast, data transfers may not flow smoothly. If this occurs, change the setting to "Standard".
Note
Default: High speed
Selection Signal Status
Specifies the level for the select signal setting of the parallel interface.
Note
Default: High
Operating Instructions Administrator Reference 2
117