Basic Procedure - Lanier Copier System Edition Operating Instructions Manual

Basic Procedure

A A A A
Make sure that the machine is in
Copy mode.
If the machine is not in Copy
mode, press the { { { { Copy} } } } key.
B B B B
When the machine is set for user
codes, enter a user code of up to 8
digits with the number keys, and
then press the { { { { #} } } } key.
Reference
⇒ "User Code", Administrator
Reference 2 Copier System Edi-
tion
C C C C
Make sure that there are no previ-
ous settings remaining.
Note
❒ To clear settings, press the
{ { { { Clear Modes} } } } key.
D D D D
Place your originals.
Reference
⇒ p.17 "Placing Originals".
E E E E
Set your desired settings.
Reference
See the explanation of each
function.
F F F F
Enter the number of copies re-
quired with the number keys.
Note
❒ The maximum number of cop-
ies that can be set is 99.
❒ To change the number entered,
press the { { { { Clear/Stop} } } } key, and
then enter the new number.
G G G G
Press the { { { { Start} } } } key.
The machine starts copying.
Note
❒ When outputting to the stan-
dard tray, the copied side will
be facing down.
❒ When outputting to the external
tray, the copied side will be fac-
ing up.
❒ To stop the machine during a
m u l t i - c o p y r u n , p r e s s t h e
{ { { { Clear/Stop} } } } key.
❒ To return the machine to the ini-
tial condition after copying,
press the { { { { Clear Modes} } } } key.
Basic Procedure
1
15