Lanier Copier System Edition Operating Instructions Manual page 439

IPP
Use the ipp command to configure the IPP settings.
Viewing setting
The following command displays the current IPP settings.
msh> ipp
Example output:
timeout=900(sec)
auth basic
• The "timeout" setting specifies how many seconds the computer keeps trying to access the net-
work printer to send print jobs when no connection could be made.
• The "auth" setting indicates the user authorization mode.
IPP timeout configuration
Specify how many seconds to wait before canceling a print job if it has been interrupted for some
reason. The range of time can be changed between 30 to 65535 seconds.
msh> ipp timeout {30 -65535}
IPP user authorization configuration
Use the IPP user authorization to restrict users that can print with IPP. The factory default is "off" .
msh> ipp auth {basic|digest|off}
• "basic" and "digest" are user authorization setting.
• "off" removes a user's authorization.
Note
If you select "basic" or "digest", see next section "Configuring IPP user authorization" for how to
configure the user name. Up to ten user names are available.
Operating Instructions Administrator Reference 2
210