Auto Reduce/Enlarge - Lanier Copier System Edition Operating Instructions Manual

Auto Reduce/Enlarge

The machine can choose an appropri-
ate reproduction ratio based on the
paper and original sizes you select.
Limitation
❒ You cannot use the Bypass Tray
with this function.
Note
❒ When using Auto Reduce/En-
large, see the following table for
the original sizes and directions
you can use:
❖ ❖ ❖ ❖ Metric version
Where Original Is
Placed
Exposure glass
Optional docu-
ment feeder (ADF)
❖ ❖ ❖ ❖ Inch version
Where Original Is
placed
Exposure glass
Optional docu-
ment feeder (ADF)
Original Size and
Direction
A3L, B4L,
A4KL, B5KL
A3L, B4L,
A4KL, B5KL,
A5KL, 8KL,
16KL
Original Size and
Direction
11" × 17"L, 8 " ×
1
/
2
" ×
1
14"L, 8 /
2
11"KL, 8" × 13"L
A4K, 11" × 17"L,
10" × 14"L, 8 " ×
1
/
2
" × 11"
1
14"L, 8 /
2
KL, 5 " × 8
1 1
/ / "
2 2
KL, US EXEL
❒ The reproduction ratios the ma-
chine will select are 25 – 400%.
❒ For some originals, the original
size might not be detected correct-
ly. ⇒ "Sizes difficult to detect", Ad-
vanced Features manual
❒ You can also place originals of dif-
ferent sizes in the optional docu-
ment feeder (ADF) at the same
time. ⇒ p.21 "Mixed Size Mode"
❒ You cannot use the Rotated Copy
function when enlarging to B4 or
A3. When enlarging to B4 or A3
size copy paper, place the original
in the L direction.
A A A A
Press [Auto Reduce/Enlarge].
B B B B
Select the paper tray.
Note
❒ If you do not wish to set any
o t h e r f u n c t i o n s , p r e s s t h e
{ { { { Start} } } } key to start copying.
Auto Reduce/Enlarge
43
1