Programs - Lanier Copier System Edition Operating Instructions Manual

Programs

You can store frequently used copy job settings
in machine memory and recall them for future
use.
Storing a Program
You can store the settings you frequently use.
Deleting a Program
You can delete a stored program.
Recalling a Program
You can recall a stored program.
Changing a Program's Name
You can change a program's name.
Note
You can store up to 10 programs.
You can select the standard mode or program
No. 10 as the mode to be set when modes are
cleared or reset, or immediately after the op-
eration switch is turned on.
Initial Mode"
Operating Instructions
p.107 "Change
Copy Reference <Advanced Features>
Paper settings are stored based on paper
size. So if you place more than one paper tray
of the same size, the paper tray prioritized
with the User Tools (System Settings) will be
selected first. "Paper Tray Priority : Copier
(for Copy/Document Server function only)",
Administrator Reference 2 Copier System
Edition
Programs are not cleared by turning the pow-
er off or by pressing the { { { { Clear Modes} } } } key.
They are canceled only when you delete or
overwrite them with another program.
53