Lanier Copier System Edition Operating Instructions Manual page 431

Note
The Access Control Address and the Access Control Mask are used to limit access to the computer
used for printing by denying access to users based on their IP address. If it is not necessary to limit
access, set the Access Control Mask to "0.0.0.0".
When the Access Control Address matches the masked result of the IP address computer attempt-
ing to print, print jobs from that IP address will be accepted by the Network Interface Board.
For example, if you assign 192.168.15.16 as the Access Control Address of the Network Interface
Board, the IP addresses that can print are as follows. XXX means any number from 1 to 254 is ac-
ceptable.
Access Control Mask
0. 0. 0.
255. 0. 0.
255.255. 0.
255.255.255.
255.255.255.255
Operating Instructions
IP addresses that can access the
printer
0 XXX.XXX.XXX.XXX
0 192.XXX.XXX.XXX
0 192.168.XXX.XXX
0 192.168. 15.XXX
192.168. 15. 16
Administrator Reference 2
202