Color Balance Program - Lanier Copier System Edition Operating Instructions Manual

C C C C
Adjust by pressing [Lighter] or [Darker].
D D D D
Press [OK].
Note
The Adjust/Program Color indicator will
light up, when adjusting the color balance.
The adjusted settings will be deleted and
the initial values will return when Auto
Clear has been performed, the { { { { Clear
Modes} } } } key has been pressed, or when the
power has been turned off.
Operating Instructions Copy Reference <Advanced Features>

Color Balance Program

You can also store the color balance setting in
memory and recall it when you want to use it.
Note
You can store up to 3 contents.
If you want to change the settings, make sure
to correctly register them one more time. The
previously registered contents will then be
changed.
Storing the Adjusted Color Balance
A A A A
Change the color balance.
Reference
p.94 "Color Balance"
95