Appendix; Configuring The Printer Using Smartnetmonitor For Admin - Lanier Copier System Edition Operating Instructions Manual

8. Appendix

Configuring the Printer using SmartNetMonitor for
Admin
Using SmartNetMonitor for Admin, you can not only monitor the status of network printers but also
allows you to change the configurations of the network interface board using the TCP/IP protocol or
IPX/SPX protocol.
OS
Microsoft Windows 95/98/Me
Microsoft Windows 2000
Microsoft Windows NT4.0
The following describes the method of changing the network interface board configuration.
Operating Instructions
Protocol Stack
TCP/IP provided with Windows 95/98/Me
IPX/SPX provided with Windows 95/98/Me
NetWare network client provided with Windows 95/98
Novell Client for Windows 95/98
TCP/IP provided with Windows 2000
IPX/SPX provided with Windows 2000
NetWare Client provided with Windows 2000
Novell Client for Windows NT/2000
TCP/IP provided with Windows NT
IPX/SPX provided with Windows NT
Client Service for NetWare provided with Windows NT
Novell Client for Windows NT/2000
Administrator Reference 2
188