Selecting Original Type Setting - Lanier Copier System Edition Operating Instructions Manual

Manual Image Density
A A A A
Press [Auto Image Density] to cancel
it.
B B B B
Press [Lighter] or [Darker] to adjust
the image density.
Note
❒ If you do not wish to set any
o t h e r f u n c t i o n s , p r e s s t h e
{ { { { Start} } } } key to start copying.
Combined Auto and Manual Image
Density
A A A A
Make sure that [Auto Image Density]
is selected.
Note
❒ If [Auto Image Density] is not se-
lected, press [Auto Image Density].
B B B B
Press [Lighter] or [Darker] to adjust
the density.
Note
❒ If you do not wish to set any
o t h e r f u n c t i o n s , p r e s s t h e
{ { { { Start} } } } key to start copying.
Selecting Original Type
Setting
Select one of the following types to
match your originals:
❖ ❖ ❖ ❖ Text
Select this mode when your origi-
nals contain only text (no pictures).
❖ ❖ ❖ ❖ Text/Photo
Select Text/Photo when your orig-
inals contain photographs or pic-
tures with texts.
❖ ❖ ❖ ❖ Photo
Delicate tones of photographs and
pictures can be reproduced with
this mode.
Note
❒ If you select "Text/Photo" or
"Photo" for the original type,
select the photo type from the
three below:
• Glossy Photo
• Printed Photo
• Copied Photo
❖ ❖ ❖ ❖ Generation
If your originals are copies (gener-
ation copies), the copy image can
be reproduced sharply and clearly.
❖ ❖ ❖ ❖ Pale
Select this mode for originals that
have lighter lines written in pencil
or for faint copied slips. The faint
lines will be clearly copied.
❖ ❖ ❖ ❖ Map
Reading with settings suitable for
Map originals. "Others" is dis-
played when "Original Type Dis-
play" (copy/document server box
initial settings) has been set to
"Display".
Basic Functions
1
27