When The { { { { Facsimile} } } } Key Is Lit In Red - Lanier Copier System Edition Operating Instructions Manual

When the { { { { Facsimile} } } } Key is Lit in Red

If this key is lit, refer to the table below and take the appropriate action.
Problem
Paper has run out.
The paper output tray is full.
The machine is in RDS (Remote Diagnostic
System) mode.
A facsimile error has occurred.
When the {Facsimile} Key is Lit in Red
Solution
Add paper.
⇒ "Loading Paper" in Maintenance Guide 2
Copier System Edition
Remove the paper from the tray.
Wait with the main power switch on. The ma-
chine will enter the standby mode after it exits
from the RDS mode.
The facsimile has a problem. Contact a service
representative. The copier will still function
normally.
4
75