Troubleshooting; If You Cannot Make Clear Copies - Lanier Copier System Edition Operating Instructions Manual

2. Troubleshooting

If You Cannot Make Clear Copies

Problem
Copies appear dirty.
The reverse side of an original image
is copied.
A shadow appears on copies if you
use pasted originals.
The same copy area is dirty whenever
making copies.
Operating Instructions
Cause
The image density is too dark.
Auto Image Density is not selected.
The image density is too dark.
Auto Image Density is not selected.
The image density is too dark.
The exposure glass or optional docu-
ment feeder (ADF) is dirty.
Copy Reference <Advanced Features>
Solution & Reference
Adjust the image density.
ing Copy Image Density", Basic Fea-
tures manual
Select Auto Image Density. "Ad-
justing Copy Image Density", Basic
Features manual
Adjust the image density.
ing Copy Image Density", Basic Fea-
tures manual
Select Auto Image Density.
justing Copy Image Density", Basic
Features manual
Adjust the image density.
ing Copy Image Density", Basic Fea-
tures manual
Change the orientation of the origi-
nal.
Put mending tape on the pasted part.
Clean them.
sure Glass", "When using the docu-
ment feeder (ADF)", Maintenance
Guide 2 Copier System Edition
74
"Adjust-
"Adjust-
"Ad-
"Adjust-
"Cleaning the Expo-