Turning On The Power Switch / Auto Job Start; Turning On The Power Switch/Auto Job Start - Lanier 5722 Operator's Manual

3. TURNING ON THE POWER SWITCH / AUTO JOB START

Turning ON the Power Switch
1
Turn ON the power switch.
● The following message appears.
Wait Warming Up
2
About 9 minutes later, the message
"READY" appears.
● This message indicates that you can make
copies at any time.
● If this message appears:
If the copier has not been used for a long
time, the copier automatically goes into the
adjustment mode and the message on the
right may appear before warming up.
It will soon start working. Do not turn OFF
the power. Just wait for a while.
Wait
Performing Auto Calibration
21