Monitoring And Configuring The Printer; Using Web Image Monitor - Lanier LD225 Network Manual

4. Monitoring and Configuring

Using Web Image Monitor

Using Web Image Monitor, you can check the machine status and change settings.
❖ Available operations
The following operations can be remotely performed using Web Image Mon-
itor from a client computer.
• Displaying machine status or settings
• Checking the print job status or history
• Checking, modifying, printing, or deleting print jobs stored in the Docu-
ment Server
• Interrupting currently printing jobs
• Resetting the printer
• Managing the Address Book
• Making machine settings
• Making network protocol settings
• Making security settings
❖ Configuring the machine
To perform the operations from Web Image Monitor, TCP/IP is required. After
the machine is configured to use TCP/IP, operations from Web Image Monitor
become available.
❖ Recommended Web browser
• Windows:
Internet Explorer 5.5 SP1 or higher
Netscape Navigator 7.0 or higher
• Mac OS:
Netscape Navigator 7.0 or higher
Safari 1.0 or higher
Note
❒ To use Netscape Navigator with Secured Sockets Layer (SSL: an encryption
protocol), use Netscape Navigator 7.0 or higher.
❒ If the previous versions of the Web browser above are used or JavaScript and cookies are
not enabled with the Web browser used, display and operation problems may occur.
❒ If you are using a proxy server, change the Web browser settings. Contact
your network administrator for information about the settings.
❒ The previous page may not appear even after the back button of a Web browser
is clicked. If this happens, click the refresh button of a Web browser.
❒ Updating the machine information is not automatically performed. Click [Refresh]
in the display area to update the machine information.
❒ We recommend using Web Image Monitor in the same network.
❒ You cannot access to the machine from outside the firewall.
❒ When using the machine under DHCP, the IP address may be automatically changed by
the DHCP server settings. Enable DDNS setting on the machine, and then connect using
the machine's host name. Alternatively, set a static IP address to the DHCP server.
the Printer
67