Lanier Copier System Edition Operating Instructions Manual page 23

Replacing Consumables and Maintenance Kit
F F F F
Lift the inner cover until it clicks
into place and holds.
1
The Photoconductor Units are in-
stalled as shown in the illustration.
The black Photoconductor Unit is
the upper left one. The other three
are color Photoconductor Units.
12
G G G G
Remove the Photoconductor Unit
you want to replace.
For black, remove the upper left
one, and for color, remove the
three on the right.
A Move the green hook slowly to
the right as shown in the illus-
tration. The green hook is lo-
cated on the upper right of the
Photoconductor Unit.
ZDJH016J
B Grip the green areas at the top
and bottom of the Photocon-
ductor Unit, and pull slowly
until you can see all of the
green handle.
ZDJH045J
Important
❒ Pulling out the Photoconduc-
tor Unit quickly might cause
it to drop.
ZDJX701J
ZDJH211J