Display And Operating Components; Backlight Switch-Off; General Information; Operating And Error Displays - Bosch Rexroth IndraControl VDP 08.3 Manual

DOK-SUPPL*-VDP*08.3***-PR02-EN-P
Rexroth IndraControl VDP 08.3/40.3 Operator Terminal
6

Display and Operating Components

6.1

Backlight Switch-off

6.1.1

General Information

6.2

Operating and Error Displays

The service life of the backlight of the display is limited (see
Parts" on page 25).
To extend the service life of the LCD backlight, the flat screen display is provi‐
ded with a backlight switch-off. This function "darkens" the display when no
operation of the panel PC occurred for a certain period of time. The length of
the time interval can be specified in the Windows Control Panel under "Power
Options" (see fig. 6-1 "Setting the darkening mode of the display in the Windows
Control Panel" on page 41).
Fig.6-1: Setting the darkening mode of the display in the Windows Control Panel
4 LEDs are provided in the upper part of the front panel to display the device
statuses and errors of the connected control cabinet PC. Start the measures
specified in the following table if one of the succeeding LEDs displays an error
or a note.
Bosch Rexroth AG
Display and Operating Components
chapter 4.5 "Wear
41/81