Status Display; General Information - Bosch Rexroth IndraControl VDP 92.3 Project Planning Manual

36/52 Bosch Rexroth AG | Electric Drives
Commissioning
7.4

Status Display

7.4.1

General Information

Pos Light-Emitting Display
Diode
H1 "UI"
Green
Green~
Green~~
Off
H2 "DIA"
Red
Red~
Red~~
Off
and Controls
6 Mbauds
12 Mbauds
The following figure shows the four status displays H1-H4:
Fig.7-2: Status displays H1-H4
Meaning
24 V supply (connector X10)
24 V supply is available
The bus connection is kept in the initialization phase by one or several
modules.
System stop (see table system stop)
No 24 V supply available
Diagnosis screen
One or several modules indicate a diagnostics.
System stop (see table system stop)
System stop (see table system stop)
No diagnostics or system stop
Rexroth IndraControl VDP 92.3 | Project Planning Manual