Bypassing Detectors - Bosch FPA‑5000 User Manual

44 en | Fire alarm
To reset an alarm message, select either
–
–
If different elements are offered for resetting:
1.
2.
3.
TEXT
If a list field is marked with an R, the process of resetting is not yet complete for this element.
If an element cannot be reset, it will continue to be displayed in the list.
After the successful resetting of all elements, the standby display is displayed.
9.9

Bypassing detectors

To bypass a detector that has triggered an alarm:
1.
2.
Notice!
The system does not transmit any information as to whether it was possible to bypass the
selected element. To monitor the operation, please check the element.
2020-07 | 3.0 | F.01U.378.877
to reset all elements that have triggered a fire alarm, for example
– Logical zone
a list of the logical zones is displayed
– Detector
a list of the detectors is displayed
Reset on the message display
or
The alarm message and Reset in the detailed view:
Depending on the variant that is offered (see above), all elements that are not in the
alarm state or all types of message within the same message type are reset.
Select an element. At the menu items Zone and Detector, a list with all the logical zones
and detectors concerned appears.
Select the list field you require. Refer to Scrolling through lists, page 25 for information
on how to scroll forward and backward through a list.
The list field is marked.
Select Reset.
The selected element / element group is reset.
R
Select the alarm message you require.
Select Bypass.
User Guide
FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
Bosch Sicherheitssysteme GmbH