24
en | Operating principle
5
Operating principle
In addition to a brief menu overview, this chapter contains information about the following
points:
–
–
–
–
–
–
–
–
–
–
–
–
5.1
Logging on and off
To gain access to access levels 2 to 4, it is necessary to log in. The prerequisite is that you
have access authorization.
Notice!
To log in, you need a user ID and password. Depending on your access authorization, you can
use only particular functions.
In the following cases, you will be asked to enter a password:
You are not logged in and want to select a function for which a password is required.
You are already logged in but a higher access authorization is required for the function you
have selected.
5.1.1
Logging in
To log in to the panel controller:
1.
2.
3.
Notice!
If you do not have your own password, enter the following numbers: 000000.
4
As long as an operator is logged in, the key icon will be displayed on the info bar.
2017.09 | 7.0 | F.01U.258.929
Logging on and off, page 24
Access authorization, page 25
Calling up the start menu, page 25
Selecting the menu, page 26
Returning to the previous selection, page 26
Working with lists, page 26
Search Function/Element, page 29
Entering numbers and text, page 29
Changing language display, page 31
Switching between status bars, page 31
Standby, page 31
Logical and physical addressing, page 31
Press the "key" key.
The login window is displayed:
Enter your user ID in the first field.
Refer to Entering numbers and text, page 29 for information on how to enter numbers.
Enter your password in the second field.
On the display, each digit of the password is indicated with an asterisk so that nobody
else can see the password.
Select OK to confirm the entries or Cancel to cancel the operation.
Refer to Change password, page 91 for information on how to set up your own password.
The standby display is shown.
User Guide
Panel Controller
Bosch Sicherheitssysteme GmbH