Change Language; Activate Outputs; Activate The Transmission Device; Detector Removal - Bosch MPC-xxxx-C Series User Manual

Panel Controller
When the walktest is complete, the following selection options are available:
–
–
–
Create / Change walktest group
–
–
3.4.2

Change language

Change the language of the displays (Change language).
3.4.3

Activate Outputs

Activate outputs:
–
–
–
–
–
Start and terminate activation of the selected elements.
3.4.4

Activate the transmission device

Activate a selected transmission device (Activate transmission device).
3.4.5

Detector removal

Bypass all sounders and transmission devices for 15 minutes while a detector is being
removed (Remove detector).
3.4.6

History Log

–
–
–
The following filters are available:
Filter
Without filter
Show all Delete filter
Period
Event types
Device types
Address range
Bosch Sicherheitssysteme GmbH
– Key deposit
– Battery
– Mains power
Adding the elements to be tested to a different walk test group (Assign tested elements
to walktest group).
Continuing the walk test (No).
Displaying tested or non-tested elements (Not tested, Tested).
Deleting or adding individual elements to specified walktest groups.
Delete all elements in a walktest group.
Select by number:
Display of a list of all controllable elements.
Search for an element in a list by entering the number.
Sounder
Strobe
HVAC
More...
Filtering and displaying specific data
Combining various filters
Print out all filtered data or a specific part of the data
Data, filtered by...
All data
Display all data with specification of event number, date,
time, element number and message type. Existing filters are
deleted.
Starting date, end date and time
Message types, such as Fault
Device types, such as Detectors
Address range within a system
User Guide
All functions at a glance | en
2017.09 | 7.0 | F.01U.258.929
15