Other - Avaya IP Agent Installation And User Manual

Other

This section lists general problems that one might encounter with Avaya IP Agent.
Problem
Collected digit information is not displayed.
User-to-User-Information (UUI) is not being
displayed.
The Call Information Panel (CIP) is not
displaying any data.
In Telecommuter mode, touch-tones are
not sent when the agent presses the
buttons of the number pad on the
telephone.
What to do
You must have a callr-info button
●
assigned for non-CallMaster telephones
so that collected digit information is
displayed. Buttons are configured for
extensions through the change
station command on the Avaya
communication server.
Ensure that VuStats is deactivated. This
●
can be done by double-clicking on the
Normal Mode button in the Phone
Features window.
On the Avaya communication server,
ensure that the UUI IE Treatment field in
the Trunk-Group definition form is set to
service-provider.
This problem can occur if you are
emulating a phone type that is normally
configured to display 40 characters of
information and it is currently in use
because of VuStats, Q-call, or if it is already
busy with information from another
incoming call. You can either change the
phone type emulation to one that displays
80 characters of information or disable
VuStats so that the call information panel is
not committed to displaying this
information. See Compatible telephone
types for Avaya IP Agent
telephones that support 80 character
displays.
This situation occurs because the data
portion of the Telecommuter configuration
is sent through Avaya IP Agent on the
personal computer and not the telephone.
Use the Dial Pad or the personal computer
keyboard to enter numbers where Dual
Tone Multi-Frequency (DTMF) signals are
needed.
Issue 1.1 August 2004
Other
on page 21 for
263