Configuring Station Settings - Avaya IP Agent Installation And User Manual

Configuring the Avaya communication server
6. Navigate to Page 9 of the customer-options form.
7. Ensure that the Limit field for the IP_Agent Rel. 5 Product ID is set to the number of
licenses you purchased for Avaya IP Agent R5.

Configuring station settings

This section provides the procedure for configuring station settings to support the
Telecommuter and Road Warrior configurations.
Before you begin
Before configuring station settings on the Avaya communication server, you should have
completed the procedures in
communication server supports Avaya IP Agent and Feature Access Codes.
To change settings on the Avaya communication server, you must have a user ID with the
proper administrative permissions.
If the station has not yet been created, you must create it using the add station
command on the Avaya communication server.
Steps for configuring Road Warrior and Telecommuter station settings
To change station settings to support the Road Warrior and Telecommuter configurations:
1. Log in to the Station Administration Terminal (SAT) on the Avaya communication
server.
70 Avaya IP Agent Installation and User Guide
Ensuring compatibility on page 68 to verify that your Avaya