Configuring Station Settings - Avaya IP Agent Installation And User Manual

6. Navigate to Page 9 of the customer-options form.
7. For the Avaya Telephone-IP configuration, ensure that the Limit field for the
IP_AGENTSC Rel. 5 Product ID is set to the number of licenses you purchased for
Avaya IP Agent R5. For the IP Telephone configuration, verify the number of licenses
for the IP_AGENT Rel. 5 Product ID.
Note:
Note:

Configuring station settings

This section provides the procedure for configuring station settings to support the IP
Telephone and Avaya Telephone-IP configurations.
Before you begin
Before configuring station settings on the Avaya communication server, you should have
completed the procedure in
communication server supports Avaya IP Agent and Feature Access Codes.
To change settings on the Avaya communication server, you must have a user ID with the
proper administrative permissions.
If the station has not yet been created, you must create it using the add station
command on the Avaya communication server.
! !
Important:
This configuration can use either the IP_AGENTSC or IP_Agent licenses.
Ensuring compatibility
Important: Important:
To use an Avaya IP telephone with Avaya IP Agent, the firmware version of
the telephone must be 1.7 or later.
IP Telephone and Avaya Telephone-IP configurations
on page 79 to verify that your Avaya
Issue 1.1 August 2004 81