Command-Line Parameters; Creating The Silent Installation Response File - Avaya IP Agent Installation And User Manual

Installing Avaya IP Agent for PC-based configurations

Command-line parameters

The following table displays the silent installation feature parameters that allow you to
record a response file and to change the names and locations of the response file and log
file.
/f1 path\filename
/f2 path\filename
/r
/s
Example of recording a response file
The following example would record a response file with a specific directory and filename:
\\server\resource\Setup\Setup.exe /r /f1 "C:\temp\callmstr.iss"
Example of silent install with specific response and log files
The following example would use a response file other than setup.iss and create a log file
of this installation on the C: drive:
"C:\temp\Avaya IP Agent\Setup.exe" /s /f1 "\\server\resource\myfile.iss" /f2 "c:\myfile.log"

Creating the silent installation response file

To record a response file for silent installation:
1. Insert the Avaya IP Agent CD-ROM in the CD-ROM drive.
The Avaya IP Agent installation program starts.
44 Avaya IP Agent Installation and User Guide
Parameter Description
Specifies a different directory location and
filename for the response file.
Specifies a different directory location and
filename for the log file. This file is created
when the /s parameter is used.
Specifies that the installation program must
record all user interactions to a response
file.
Specifies that the installation program must
use a response file to conduct a silent
installation.
If your response file has a name other than
setup.iss or is located in a different
directory than Setup.exe, you must use the
/f1 parameter in conjunction with this
parameter.