Installing Avaya IP Agent on Windows Terminal
Services
This section provides information and procedures for installing Avaya IP Agent for
Windows Terminal Services.
Before you begin
Read and understand the following items before attempting to install Avaya IP Agent for
Windows Terminal Services:
After you install Avaya IP Agent to each server, you must initialize the configuration for
●
each user.
Read the readme.txt file in the root directory of the Avaya IP Agent CD-ROM for any
●
last-minute information.
If you are upgrading Avaya IP Agent, ensure that you have obtained new licenses for
●
this version on your DEFINITY, MultiVantage, or Communication Manager system. If
you have not done so or are unsure if you have done so, contact your Avaya
representative for assistance.
If you install applications for your users from the server, you should perform these
●
installations during off-hours because the Avaya IP Agent installation might require a
restart of the system.
Steps for installing Avaya IP Agent for Windows Terminal
Services
To install Avaya IP Agent:
1. If the Avaya IP Agent installation program did not begin after the CD-ROM was
inserted, run the Launcher.exe file in the root directory of the CD-ROM.
The installation program displays the setup selection window.
2. Next to IP Agent Terminal Services Setup, select the Install button.
The installation program displays the Welcome window.
3. Select the Next button.
The installation program displays the Software License Agreement window.
Installing Avaya IP Agent on Windows Terminal Services
Issue 1.1 August 2004
57