5. Ensure that the IP Stations field is set to y.
6. Navigate to Page 9 of the customer-options form.
7. Ensure that the Limit field for the IP_AGENTSC Rel. 5 Product ID is set to the number
of licenses you purchased for Avaya IP Agent R5.
Note:
Note:
Configuring station settings
Before you begin
Before configuring station settings on the Avaya communication server, you should have
completed the procedures in
communication server supports Avaya IP Agent and Feature Access Codes.
To change settings on the Avaya communication server, you must have a user ID with the
proper administrative permissions.
If the station has not yet been created, you must create it using the add station
command on the Avaya communication server.
Steps for configuring Avaya Telephone-DCP station settings
To change station settings to support the Avaya Telephone-DCP configuration:
1. Log in to the Station Administration Terminal (SAT) on the Avaya communication
server.
This configuration can use either the IP_AGENTSC or IP_Agent licenses.
Ensuring compatibility
Avaya Telephone-DCP configurations
on page 85 to verify that your Avaya
Issue 1.1 August 2004
87