Print Operation Sequence - SATO GY412 Operator's Manual

8.10 PRINT OPERATION SEQUENCE

8.10.1 Continuous Mode (Head check disabled)
(1) Motion
Standby
The upper head is up.
The lower head is down.
Backfeed motion starts.
Backfeed to pitch
sensor position.
The upper head is down.
The lower head is up.
Start feeding the label and
printing from the lower surface
of the first label.
The lower surface of the first
label is printed.
When the second label is fed
while printing the upper surface
of the first label, the print on the
lower surface of the second
label will start.
Finished double sided
print of the first label.
Finished double sided
print of the second
label.
[Notes]
GY412 Operator Manual
Label feed direction
Upper head
The above is the base position when the I-mark sensor is selected.
Lower head Pitch sensor
Up
Down
Up
Down
Up
Down
Up
Down
Up
Down
Up
Down
Up
Down
Section 8: Appendix
Page 8-19