SATO GY412 Operator's Manual page 186

Section 8: Appendix
8.1 CUTTER AND PRINTER MOTION (cont'd)
* Head width and printable width (see illustration on previous page)
Head density
12 dots / mm
Label Guide
Page 8-4
Head width
4.41 inches / 112.0 mm
I-mark
GAP
Maximum 2.58 in. (65.5 mm)
Minimum 1.02 in. (25.8mm)
Label Guide
Printable width
4.09 inches / 104.0 mm
1.52 in.
(38.7 mm)
1.44 in.
(36.7 mm)
Paper end sensor
(GAP)
I-mark
GY412 Operator Manual