SATO GY412 Operator's Manual page 60

Section 3: Operation and Configuration
3.3 LCD MESSAGE DETAILS (cont'd)
Display
Onscreen
message
Operation
button
Display
Onscreen
message
Operation
button
Page 3-32
User Mode - VR setting
OFFSET VOLUME
PITCH +0.00 +0.00
OFFSET +25 mm
DARKNESS 50
Button
ENTER
CANCEL
FUNCTION
User Mode - Print speed setting
PRINT SPEED
06 IPS
Button
↓, ↑
ENTER
CANCEL
FUNCTION
This screen indicates the VR setting values on
the main PCB.
It displays the following adjustment values.
PITCH: It shows the value of print offset volume
on both upper and lower surfaces.
OFFSET: This shows the value of print offset vol-
ume on both upper and lower surfaces.
DARKNESS: This shows the value of darkness
volume.
Description
Goes to the PRINT SPEED screen.
Goes to the SERVICE MODE screen.
Goes to the SERVICE MODE screen.
This sets print speed.
Use the up and down arrow buttons to change
setting value and press ENTER.
The default value is 06 IPS.
Description
Enters setting value.
Saves the setting and goes to the PRINT DARK-
NESS UPPER HEAD screen.
Goes to the OFFSET VOLUME screen without
saving the setting.
Goes to the ONLINE MODE screen without sav-
ing the setting.
GY412 Operator Manual