SATO GY412 Operator's Manual page 102

Section 3: Operation and Configuration
3.3 LCD MESSAGE DETAILS (cont'd)
3.3.1.10 HEX Dump Mode
Display
Onscreen
message
Operation
button
Display
Onscreen
message
Operation
button
Page 3-74
HEX Dump Mode - Password entry
PASSWORD
0000
Button
↓, ↑
→, ←
ENTER
CANCEL
FUNCTION
HEX Dump Mode - Selection of dump data
SELECT DUMP DATA
RECEIVE DATA
RECEIVE BUFFER
Button
↓, ↑
ENTER
CANCEL
FUNCTION
Entering password.
Use ↑ and ↓ keys to change setting value and
press ENTER.
Use ← and → keys to move the cursor.
Enter the password set in Service Mode.
This message is displayed only when [SET
PASSWORD] is set to "ON" in Service Mode.
Description
Enters password.
Moves the cursor.
Verifies the entered password.
Goes to the [SELECT DUMP DATA] screen after
verifying the password.
Goes to the [ONLINE MODE] screen.
Goes to the [ONLINE MODE] screen.
Selecting the data for dump printing.
Use ↑ and ↓ keys to move the cursor and press
ENTER.
"RECEIVE DATA" : Prints the received data.
"RECEIVE BUFFER" : Prints the received print
data(1 item).
You cannot select "RECEIVE BUFFER" when
there is no receive data available.
The screen when entering HEX Dump Mode is
the same as that of Normal Mode except one icon
Description
Moves the cursor.
Goes to HEX Dump Mode.
Goes to the [ONLINE MODE] screen.
Goes to the [ONLINE MODE] screen.
GY412 Operator Manual