SATO GY412 Operator's Manual page 59

3.3 LCD MESSAGE DETAILS (cont'd)
Display
Onscreen
message
Operation
button
3.3.1.6 User Mode
Display
Onscreen
message
Operation
button
GY412 Operator Manual
Adjustment screen - Darkness setting
DARKNESS
50
Button
↓, ↑
ENTER
CANCEL
FUNCTION
User Mode - Password entry
PASSWORD
0000
Button
↓, ↑
→, ←
ENTER
CANCEL
FUNCTION
Section 3: Operation and Configuration
This adjusts print darkness.
Use the arrow buttons to change the setting value
and press ENTER.
The setting range is from 00 to 99 and the default
setting is 50.
Description
Enters setting value.
Saves the setting and goes to the PITCH POSI-
TION screen.
Goes to the OFFLINE screen without saving the
setting.
Goes to the OFFLINE screen without saving the
setting.
This enters the password.
Use the up and down arrow buttons to change
setting value and press ENTER.
Use the left and right arrow buttons to move the
cursor.
Enter the password set in Service Mode.
This message is displayed only when SET PASS-
WORD is set to ON in Service Mode.
Description
Enters password.
Moves the cursor.
Verifies the entered password.
Goes to the PRINT SPEED screen after verifying
the password.
Goes to the ONLINE MODE screen.
Goes to the ONLINE MODE screen.
Page 3-31