SATO GY412 Operator's Manual page 90

Section 3: Operation and Configuration
3.3 LCD MESSAGE DETAILS (cont'd)
3.3.1.9 Advanced Mode
Display
Onscreen
message
Operation
button
Page 3-62
Interface Mode - Password entry
PASSWORD
0000
Button
↓, ↑
←, →
ENTER
CANCEL
FUNCTION
Entering password.
Use ↑ and ↓ keys to change setting value and
press ENTER.
Use ← and → keys to move the cursor.
Enter the password set in Service Mode.
This message is displayed only when [SET
PASSWORD] is set to "ON" in Service Mode.
Description
Enters password.
Moves the cursor.
Saves the setting and goes to the [BCC CHECK]
screen.
Goes to the [PROTOCOL] screen without saving
the setting.
Goes to the [ONLINE MODE] screen without sav-
ing the setting.
GY412 Operator Manual