SATO GY412 Operator's Manual page 212

Section 8: Appendix
8.10 PRINT OPERATION SEQUENCE (cont'd)
The upper head is up.
The lower head is down.
Backfeed motion starts.
Position adjustment at the top
of print position.
Note:
• The above is the base position when the I-mark sensor is selected.
•
(2) Timing chart
Power ON
Label feed
Upper head
motion
Lower head
motion
Label cut
Upper/Lower
heads check
Printer motion
Page 8-30
Backfeed
Prints the 1
st
Prints the 1
label (Upper)
label (Lower)
Up
Down
Label feed to
Backfeed
cut position
st
nd
Prints the 2
label (Lower)
GY412 Operator Manual