SATO GY412 Operator's Manual page 70

Section 3: Operation and Configuration
3.3 LCD MESSAGE DETAILS (cont'd)
Display
Onscreen
message
Operation
button
Page 3-42
Interface Mode - RARP setting
RARP SETTING RARP SETTING
ENABLE ENABLE
DISABLE DISABLE
Button
↓,↑
←, →
ENTER
CANCEL
FUNCTION
Enabling and disabling RARP.
Use ← and → keys to move the cursor and press
ENTER.
The default setting is "DISABLE".
[Important] Changed setting becomes effective at
next power-on.
Description
Enters setting value.
Moves the cursor.
"ENABLE" : Saves the setting and goes to the
[SUBNET MASK] screen.
"DISABLE" : Saves the setting and goes to the
[IP ADDRESS] screen.
Goes to the [IP RESOLUTION METHOD] screen
without saving setting value.
Goes to the [ONLINE MODE] screen without sav-
ing the setting.
GY412 Operator Manual