SATO GY412 Operator's Manual page 67

3.3 LCD MESSAGE DETAILS (cont'd)
3.3.1.7 Interface Mode
Display
Onscreen
message
Operation
button
Display
Onscreen
message
Operation
button
GY412 Operator Manual
Interface Mode -Password entry
PASSWORD
0000
Button
↓, ↑
→, ←
ENTER
CANCEL
FUNCTION
Interface Mode - Interface board setting
INTERFACE SETTING
YES
NO
Button
→, ←
ENTER
CANCEL
FUNCTION
Section 3: Operation and Configuration
Entering password.
Use ↑ and ↓ keys to change setting value and
press ENTER.
Use ← and → keys to move the cursor.
Enter the password set in Service Mode.
This message is displayed only when "SET
PASSWORD" is set to "ON" in Service Mode.
Description
Enters password.
Moves the cursor.
Verifies the entered password.
Goes to the input device setting screen after veri-
fying the password.
Goes to the ONLINE MODE screen.
Goes to the ONLINE MODE screen.
Selecting whether or not to change interface
board settings.
Use ← and → keys to move the cursor and press
ENTER.
"YES" : Goes to the [INTERFACE PORT] screen.
"NO" : Goes to the [ONLINE MODE] screen.
The default setting is "NO".
Description
Moves the cursor.
"YES" : Goes to the [INTERFACE PORT] screen.
"NO" : Goes to the [ONLINE MODE] screen.
Goes to the input device setting screen.
Goes to the [ONLINE MODE] screen.
Page 3-39