SATO GY412 Operator's Manual page 97

3.3 LCD MESSAGE DETAILS (cont'd)
Display
Onscreen
message
Operation
button
GY412 Operator Manual
Advanced Mode - Head check method setting
HEAD CHECK MODE
LAST ITEM
CHECK PAGE
ALL CHECK
Button
↓↑
ENTER
CANCEL
FUNCTION
Section 3: Operation and Configuration
Setting the head check range.
Use ↑ and ↓ keys to move the cursor and press
ENTER.
"LAST ITEM" : Performs head check when paus-
ing the print operation in Continuous Mode or
when in back feed motion.
"CHECK PAGE" : Performs head check based on
the count specified in [HEAD CHECK PAGE
NO.].
"ALL CHECK" : Performs head check per label.
The default setting is "LAST ITEM".
This message is displayed only when [HEAD
CHECK] is set to "ENABLE".
Description
Moves the cursor.
"ALL CHECK": Saves the setting and goes to the
[SELECT LANGUAGE] screen.
"LAST ITEM": Saves the setting and goes to the
[SELECT LANGUAGE] screen.
"CHECK PAGE": Saves the setting and goes to
the [HEAD CHECK PAGE NO.] screen.
Goes to the [HEAD CHECK] screen without sav-
ing the setting.
Goes to the [ONLINE MODE] screen without sav-
ing the setting.
Page 3-69