SATO GY412 Operator's Manual page 79

3.3 LCD MESSAGE DETAILS (cont'd)
Display
Onscreen
message
Operation
button
GY412 Operator Manual
Interface Mode - Item number check setting
ITEM NO CHECK
ENABLE
DISABLE
Button
←, →
ENTER
CANCEL
FUNCTION
Section 3: Operation and Configuration
Setting item number check function.
Use ← and → keys to move the cursor and press
ENTER.
"ENABLE" : Item number check function is ON.
"DISABLE" : Item number check function is OFF.
The default setting is "DISABLE".
This screen is displayed only when "STATUS5" is
selected in [PROTOCOL].
Refer to the Interface Specifications for this func-
tion details.
Description
Moves the cursor.
Saves the setting and goes to the [BCC CHECK]
screen.
Goes to the [PROTOCOL] screen without saving
the setting.
Goes to the [ONLINE MODE] screen without sav-
ing the setting.
Page 3-51